SHOPPING CART 
Profile Bits for Cupboard Doors
Ogee
This cutter has a balanced curve for a symmetrical ogee cut. The profile is suited for surface cuts. For edge cutting OG444B is recommended. The flat bottom cut is ideal when used on the board face.
| 1/4" (6.4mm) Diameter x 1 5/8" (40mm) Long Shank | ||||||
|---|---|---|---|---|---|---|
| REF.NO. | CUTTER | DIAMETER | CUTTER | HEIGHT | PRICE | BUY |
| P461 | 9.5mm | 3/8" | 10mm | 3/8" | NZD$57.00 |  |
| P462 | 12.7mm | 1/2" | 10mm | 3/8" | NZD$63.39 | |
| P463 | 19mm | 3/4" | 12.7mm | 1/2" | NZD$63.39 | |
| 1/2" (12.7mm) Diameter x 1 5/8" (40mm) Long Shank | ||||||
| P464 | 19mm | 3/4" | 12.7mm | 1/2" | NZD$63.39 | |
| P465 | 30mm | 1 3/16" | 16mm | 5/8" | NZD$63.39 | |
| P466 | 35mm | 1 3/8" | 22mm | 7/8" | NZD$63.39 | |
| P490 | 27mm | 1 1/16" | 11mm | 7/16" | NZD$63.39 | |
| P491 | 32mm | 1 1/4" | 12.7mm | 1/2" | NZD$63.39 | |
| P492 | 32mm | 1 1/4" | 14mm | 9/16" | NZD$63.39 | |
- Show All Shop Categories
- Routers Bits and Accessories
- Router Bits (Tungsten Tipped)
- Straight Router Bits
- Router Collet Extension
- Motorbody Building Bits
- Rounding Over Bits
- Ball Nose and Coving Bits
- Ogee Bits
- Classical Profile and Furniture Mouldings
- Chamfer and Angle Bits
- Dovetail, Angle Cutters and Vee Grooving
- Edge Radius Bits
- Moulding Bits and Inside Radius Bits
- Plinth Router Bits and Vee Grooving Bits
- Inverted Template & flush Trim Router Bits
- Profile and Furniture Moulding Bits
- Draw Pull and Combination Bits
- Nosing and Rebating Bits
- Classical Regency and Reeding Bits
- Mitre Lock Bits
- Profile Bits for Wardrobe Doors
- Profile Bits for Cupboard Doors
- Furniture Joining Bits
- Flush Trim & Template Following Bits
- Combination Laminate and Trimming Bits
- Edge Grooving Cutter
- Laminate Trimming and Beveling Bits
- Solid Surface Router Bits
- Solid Surface Kits
- Three Wing Moulding Cutters
- Weather Strip Grooving Router Bits
- Arbours and Bearing and Shim Spacers
- Compression and Spiral Router Bits
- HSS Aluminium Joinery Cutters
- Indexable Router Bits
- Indexable Blades
- Templates Accessories and Profile Cutterhead
- Router Bits (Tungsten Tipped)
LINBIDE
126 Captain Springs Road
Te Papapa, Auckland
New Zealand
PO Box 12-275, Auckland
Telephone 64-9-636 4121
Facsimile 64-9-636 8851
Email sales@linbide.co.nz
126 Captain Springs Road
Te Papapa, Auckland
New Zealand
PO Box 12-275, Auckland
Telephone 64-9-636 4121
Facsimile 64-9-636 8851
Email sales@linbide.co.nz