Routers Bits and Accessories

Weather Strip Grooving Router Bits

Draft Strip Cutters

These cutters are perfect for fitting Aquamae, Raven,and Schleger weather seal and smoke seals using a portable router.
A small trimming router with 1/4 (6.4mm) collets is recommended. This will enable the cutter to cut into the square corners.
Draft Strip Cutters
1/4" (6.4MM) Diameter 23/8" (60mm) Long Shank
REF.NO. DIAMETER KERF BEARING PRICEBUY
DS24 31mm 2.0mm B16 NZD$69.35Shopping Basket
DS254 31mm 2.5mm B16 NZD$69.35Shopping Basket
DS34 31mm 3.0mm B16 NZD$69.35Shopping Basket
DS354 31mm 3.5mm B16 NZD$69.35Shopping Basket
1/2" (12.7mm) Diameter 23/8" (60mm) Long Shank
REF.NO. DIAMETER KERF BEARING PRICEBUY
DS28 34mm 2.0mm B198X2 NZD$76.28Shopping Basket
DS258 34mm 2.5mm B198X2 NZD$76.28Shopping Basket
DS38 34mm 3.0mm B198X2 NZD$76.28Shopping Basket
DS358 34mm 3.5mm B198X2 NZD$76.28Shopping Basket
Images/Products/DraftStripCutter_DS354.jpg
Images/Products/WEATHER_CUTTER.jpg
 
© 2011 Trevor Lindsay Ltd trading as Linbide. All rights reserved.