Solid Surface Kits
Inlay and Seam Kit
This is a neat little guide kit to produce perfect irregular seams or inlays in Solid Surface Materials. You simply make a template of 1/2" material of the seam or inlay you want to produce. Attach the template on the material to be cut. Then, with a special collar installed on the template guide provided, you route around the inside of your pattern throwing the waste away. You then move your template to another piece of material, remove the collar from the template guide, and route inside the template again, this time saving the inside cut. That inside cut drops into the first cut producing a perfect match. Test the repair kit on scrap material before starting the job. The inlay kit is available with a 1/4" diameter - 3/4" depth of cut or a 1/2" diameter - 11/4" depth of cut.
- Show All Shop Categories
- Routers Bits and Accessories
- Router Bits (Tungsten Tipped)
- Straight Router Bits
- Router Collet Extension
- Motorbody Building Bits
- Rounding Over Bits
- Ball Nose and Coving Bits
- Ogee Bits
- Classical Profile and Furniture Mouldings
- Chamfer and Angle Bits
- Dovetail, Angle Cutters and Vee Grooving
- Edge Radius Bits
- Moulding Bits and Inside Radius Bits
- Plinth Router Bits and Vee Grooving Bits
- Inverted Template & flush Trim Router Bits
- Profile and Furniture Moulding Bits
- Draw Pull and Combination Bits
- Nosing and Rebating Bits
- Classical Regency and Reeding Bits
- Mitre Lock Bits
- Profile Bits for Wardrobe Doors
- Profile Bits for Cupboard Doors
- Furniture Joining Bits
- Flush Trim & Template Following Bits
- Combination Laminate and Trimming Bits
- Edge Grooving Cutter
- Laminate Trimming and Beveling Bits
- Solid Surface Router Bits
- Solid Surface Kits
- Three Wing Moulding Cutters
- Weather Strip Grooving Router Bits
- Arbours and Bearing and Shim Spacers
- Compression and Spiral Router Bits
- HSS Aluminium Joinery Cutters
- Indexable Router Bits
- Indexable Blades
- Templates Accessories and Profile Cutterhead
- Router Bits (Tungsten Tipped)
LINBIDE
126 Captain Springs Road
Te Papapa, Auckland
New Zealand
PO Box 12-275, Auckland
Telephone 64-9-636 4121
Facsimile 64-9-636 8851
Email sales@linbide.co.nz
126 Captain Springs Road
Te Papapa, Auckland
New Zealand
PO Box 12-275, Auckland
Telephone 64-9-636 4121
Facsimile 64-9-636 8851
Email sales@linbide.co.nz