Solid Surface Kits
Solid Surface Repair Kit
This repair kit is very similar to the Solid Surface Inlay and Seam Kit. The big difference is that the router bit has a 5ยบ taper to it so that the repair doesn't fall through the counter top. A template is needed just as in the inlay Kit, the procedure for routing is a little different though. This template is first attached to the counter top needing the repair. Then, with a special collar installed on the template guide provided, you route around the inside of your pattern throwing the inside away. Next you move the template to the material you will make the repair from, except this time you will flip the template upside down before routing. This needs to be done since the inlay will need to be flipped over to fit into the repair. The repair kit comes with complete instructions. Test this repair kit on scrap material before starting the job.
- Show All Shop Categories
- Routers Bits and Accessories
- Router Bits (Tungsten Tipped)
- Straight Router Bits
- Router Collet Extension
- Motorbody Building Bits
- Rounding Over Bits
- Ball Nose and Coving Bits
- Ogee Bits
- Classical Profile and Furniture Mouldings
- Chamfer and Angle Bits
- Dovetail, Angle Cutters and Vee Grooving
- Edge Radius Bits
- Moulding Bits and Inside Radius Bits
- Plinth Router Bits and Vee Grooving Bits
- Inverted Template & flush Trim Router Bits
- Profile and Furniture Moulding Bits
- Draw Pull and Combination Bits
- Nosing and Rebating Bits
- Classical Regency and Reeding Bits
- Mitre Lock Bits
- Profile Bits for Wardrobe Doors
- Profile Bits for Cupboard Doors
- Furniture Joining Bits
- Flush Trim & Template Following Bits
- Combination Laminate and Trimming Bits
- Edge Grooving Cutter
- Laminate Trimming and Beveling Bits
- Solid Surface Router Bits
- Solid Surface Kits
- Three Wing Moulding Cutters
- Weather Strip Grooving Router Bits
- Arbours and Bearing and Shim Spacers
- Compression and Spiral Router Bits
- HSS Aluminium Joinery Cutters
- Indexable Router Bits
- Indexable Blades
- Templates Accessories and Profile Cutterhead
- Router Bits (Tungsten Tipped)
LINBIDE
126 Captain Springs Road
Te Papapa, Auckland
New Zealand
PO Box 12-275, Auckland
Telephone 64-9-636 4121
Facsimile 64-9-636 8851
Email sales@linbide.co.nz
126 Captain Springs Road
Te Papapa, Auckland
New Zealand
PO Box 12-275, Auckland
Telephone 64-9-636 4121
Facsimile 64-9-636 8851
Email sales@linbide.co.nz