Motorbody Building Bits
Motor Body Building Bits, Laminated Panels and Doors
A.) A piercing point and three pilots are formed in the cutter body. This enables the cutter to be guided by jigs or the inner frame from the top, middle or bottom of the cutter. A very useful cutter for motor body building, caravans and boat building.
B.) This unique cutter is especially made to cut out body sides using the middle guide to follow the inside frame. The cutter has a piercing and spiral cut of high speed steel for cutting the aluminium outer skin and tungsten carbide tipped top cutter for the interior plywood.
B.) This unique cutter is especially made to cut out body sides using the middle guide to follow the inside frame. The cutter has a piercing and spiral cut of high speed steel for cutting the aluminium outer skin and tungsten carbide tipped top cutter for the interior plywood.
Staggered tooth straight router bits for fast cutting, due to single tooth action, but balanced with opposite tooth. Will drill own starting hole.
- Show All Shop Categories
- Routers Bits and Accessories
- Router Bits (Tungsten Tipped)
- Straight Router Bits
- Router Collet Extension
- Motorbody Building Bits
- Rounding Over Bits
- Ball Nose and Coving Bits
- Ogee Bits
- Classical Profile and Furniture Mouldings
- Chamfer and Angle Bits
- Dovetail, Angle Cutters and Vee Grooving
- Edge Radius Bits
- Moulding Bits and Inside Radius Bits
- Plinth Router Bits and Vee Grooving Bits
- Inverted Template & flush Trim Router Bits
- Profile and Furniture Moulding Bits
- Draw Pull and Combination Bits
- Nosing and Rebating Bits
- Classical Regency and Reeding Bits
- Mitre Lock Bits
- Profile Bits for Wardrobe Doors
- Profile Bits for Cupboard Doors
- Furniture Joining Bits
- Flush Trim & Template Following Bits
- Combination Laminate and Trimming Bits
- Edge Grooving Cutter
- Laminate Trimming and Beveling Bits
- Solid Surface Router Bits
- Solid Surface Kits
- Three Wing Moulding Cutters
- Weather Strip Grooving Router Bits
- Arbours and Bearing and Shim Spacers
- Compression and Spiral Router Bits
- HSS Aluminium Joinery Cutters
- Indexable Router Bits
- Indexable Blades
- Templates Accessories and Profile Cutterhead
- Router Bits (Tungsten Tipped)
LINBIDE
126 Captain Springs Road
Te Papapa, Auckland
New Zealand
PO Box 12-275, Auckland
Telephone 64-9-636 4121
Facsimile 64-9-636 8851
Email sales@linbide.co.nz
126 Captain Springs Road
Te Papapa, Auckland
New Zealand
PO Box 12-275, Auckland
Telephone 64-9-636 4121
Facsimile 64-9-636 8851
Email sales@linbide.co.nz